02-6100-6483

Pull in Place Pipe Lining

Long lasting and affordable, give your cracked, damaged and weathered pipes a new lease on life with pull in place pipe lining.

Smiling Canberra Pipe Relining Staff
installed blue metal water pipe and valves
blue metal pipe connection

What is Pull in Place Pipe Lining?

Pull-in Place pipe (PIP) lining can give your pipes up to another 50 years of life and solves pipe problems and wear. If your system has shorter lines without friction, PIP lining could be a suitable solution for your issue. The process of PIP lining installation is simple, with a tube that contains resin being pulled through the pipe into place. Static pressure slowly inflates the tube, applying resin to the inside of your existing tube. This effectively seals any damaged areas and extends the life of your pipes without digging or wall removal.

How it Works

When you contact Canberra Pipe Lining, a member of our team will be dispatched to your location to assess the problem. After analysing your system, they will decide whether inversion pipe relining or PIP lining repair will be a better solution.

  • Measure and Assess – Your technician will start by measuring the pipes in your system and creating a plan for installation. This involves locating entry and exit points, and deciding where they can pull the lining through.
  • Installation – Your technician will string a wire through the area of repair, and attach a tube filled with resin to the wire. They will then carefully pull the tube through the pipe until it’s in place. They will slowly inflate the tube using static pressure and leave it to cure.
  • Removal – After the resin has cured, your technician will slowly deflate the tube and pull the liner and its wire out of the pipe. The remaining resin will be sealed to the outside of the tube forming an additional barrier. After a quick quality check, your system should be back in action.

When faced with needing a repair, it’s best to trust the professionals. Contact us to book your next service today.

Man wearing engineering helmet
a man focuses on repairing the pipe of a bathroom sink

How It Works?

When you contact Canberra Pipe Lining, a member of our team will be dispatched to your location to assess the problem. After analysing your system, they will decide whether inversion pipe relining or PIP lining repair will be a better solution.

1. Measure and Assess
Your technician will start by measuring the pipes in your system and creating a plan for installation. This involves locating entry and exit points, and deciding where they can pull the lining through.
2. Installation
Your technician will string a wire through the area of repair, and attach a tube filled with resin to the wire. They will then carefully pull the tube through the pipe until it’s in place. They will slowly inflate the tube using static pressure and leave it to cure.
3. Removal
After the resin has cured, your technician will slowly deflate the tube and pull the liner and its wire out of the pipe. The remaining resin will be sealed to the outside of the tube forming an additional barrier. After a quick quality check, your system should be back in action.

When faced with needing a repair, it’s best to trust the professionals. Contact us to book your next service today.

Testimonials

Allan Baxte
Allan Baxte
★★★★★
Customer
Read More
I arrived at my townhouse on a Friday afternoon at about 1:30 after a week away to find that the hot water service had sprung a leak during my absence. I called Water Tight and a representative (Tom) was here within an hour. After an inspection and quotation Tom undertook to replace the HWS that day and did so with two other members of staff. I was very favourably impressed with the prompt and efficient service. I would recommend Water Tight to anyone with an urgent plumbing problem.
Gillian Sloar
Gillian Sloar
★★★★★
Customer
Read More
From my first conversation with Tom, I was treated in a very professional manner. The quote I was given was fair. Nathan and Aaron were two polite young men who dealt with my plumbing problem promptly and expertly, leaving my house so clean. Excellent workmanship and customer care. I highly recommend Water Tight Canberra. Thank you!!
Geoff Young
Geoff Young
★★★★★
Customer
Read More
We have been chasing a plumber for months in Canberra, when today we saw Water tight in their van at a neighbor. One call and the wonderful receptionist organised for Aaron to come over in his Lunch and fix our major shower blockage. What can I say, OMG!!! This is service, Aaron would not settle for anything less than perfection. Pulled the shower apart, explained in detail to me everything that was happening and found the annoying problem. A old piece of plastic off the washer stuck in the pipe. He even gave me great advice on our toilet issues and over pressure issues. Unbelievable service, more intent on fixing the problem and doing it right than ripping us off. I wholeheartedly recommend Water Tight Canberra and especially Aaron as the no 1 plumbing service in Australia.

contact us

Get In Touch

Get In Touch with Trusted Plumbers in Canberra

Pipe relining is a permanent repair to your sewer and stormwater drainage pipe system without the need for excavation or disturbance of the ground that is above the pipework.

When looking for plumbers in Canberra, you can trust Canberra Pipe Relining. With five-star ratings on Google and Facebook, we’re proud to be the community choice for pipe repairs in Canberra. For more information on any of our services, or to book an inspection of your current system, call or email us today.

  • Email us
  • Call us

Request Consultation Now For FREE